HSRP Filling up Logs

gdrandles · ‎05-04-2012

It looks like both my HSRP Interfaces (VLAN 600 & 700) cycle through standby --> active ---> speak continuously on one of the two switches. What can be causing this?

*May 4 06:41:24.883: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Speak -> Standby

*May 4 06:41:33.671: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Standby -> Active

*May 4 06:41:33.671: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Active -> Speak

*May 4 06:41:34.251: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Speak -> Standby

*May 4 06:41:47.691: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Standby -> Active

*May 4 06:41:47.703: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Active -> Speak

John Blakley · ‎05-04-2012

Are you tracking interfaces? If not, you are losing hello packets somehow. I noticed that you have the configuration on group 0 which usually means that a group wasn't specified. Do you have another group on 0 as well? Can you post your HSRP config?

HTH,

John

HTH, John *** Please rate all useful posts ***