CME GUI doesn't put phone type into config

Unanswered Question
May 5th, 2012
User Badges:

Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9_IVS-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)

#sho telephony-service

CONFIG (Version=8.6)


Version 8.6

Max phoneload sccp version 17

Max dspfarm sccp version 18

Cisco Unified Communications Manager Express

For on-line documentation please see:

protocol mode default

ip source-address port 2000

ip qos dscp:

ef (the MS 6 bits, 46, in ToS, 0xB8) for media

cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal

af41 (the MS 6 bits, 34, in ToS, 0x88) for video

default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup

max-ephones 42

max-dn 144

max-conferences 3 gain -6

dspfarm units 0

dspfarm transcode sessions 0

conference software


no privacy-on-hold

hunt-group report delay 1 hours

hunt-group logout DND

max-redirect 10

cnf-file location: system:

cnf-file option: PER-PHONE-TYPE

network-locale[0] RU   (This is the default network locale for this box)

network-locale[1] US

network-locale[2] US

network-locale[3] US

network-locale[4] US

user-locale[0] RU    (This is the default user locale for this box)

user-locale[1] US

user-locale[2] US

user-locale[3] US

user-locale[4] US

srst mode auto-provision is OFF

srst ephone template is 0

srst dn template is 0

srst dn line-mode single

moh flash:/cme/

time-format 24

date-format dd-mm-yy

timezone 43 Taipei Standard Time

call-forward pattern .T

call-forward system redirecting-expanded

transfer-pattern .T

keepalive 30 auxiliary 30

timeout interdigit 10

timeout busy 10

timeout ringing 60

timeout transfer-recall 0

timeout ringin-callerid 8

timeout night-service-bell 12

caller-id name-only: enable

system message UTair Krasnoyarsk

web admin system name Admin

web admin customer name Customer

edit DN through Web:  enabled.

edit TIME through web:  disabled.

background save interval 10 minutes

Log (table parameters):

     max-size: 150

     retain-timer: 15

create cnf-files version-stamp 7960 May 05 2012 17:23:57

transfer-system full-consult

transfer-digit-collect new-call

local directory service: enabled.

Extension-assigner tag-type ephone-tag.

Whenever i add a phone using GUI, phone works fine except it doesn't load locale.

After some investigating and forum digging, i found what the main problem is that there is no type option added into config, and so IOS does not creafe phone cnf file and phone doesn't load per type config neither.

when i try to set phone type manually, it complains like this, maybe that's the thing GUI missing?

(config-ephone)#type 6921

Force max-calls-per-button to 2

(config-ephone)#max-calls-per-button 2

(config-ephone)#type 6921

Is that IOS bug?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Sat, 05/05/2012 - 03:50
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

CME GUI doesn't give good results for configuration or administration.

You need to use CLI, or you can try the CCP GUI.


This Discussion

Related Content