configuring a Cisco 3750-x port for multi vlan

Unanswered Question
May 5th, 2012
User Badges:

Scenario: I have a vmserver w four virtual servers all in configured w in different subnets. What's the best way to configure a 3750-x switch to route traffic from the virtual servers to their vlans?

Sent from Cisco Technical Support iPhone App

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
chenoufimehdi Sat, 05/05/2012 - 13:14
User Badges:


I think that you will have to provide more information regarding the server itself  for now what would be abvious is if your server NIC support trunking than you need to configure the switch port to trunk



Reza Sharifi Sat, 05/05/2012 - 13:19
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

If you are using the 3750 as a layer 3 device then you need to creat an SVI for each subnet

If the 3750 is a layer 2 device than you can bundle all your links using an Etherchannel using LACP


Sent from Cisco Technical Support iPhone App


This Discussion