cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
615
Views
0
Helpful
2
Replies

configuring a Cisco 3750-x port for multi vlan

nyasham14
Level 1
Level 1

Scenario: I have a vmserver w four virtual servers all in configured w in different subnets. What's the best way to configure a 3750-x switch to route traffic from the virtual servers to their vlans?

Sent from Cisco Technical Support iPhone App

2 Replies 2

Mehdidz
Level 1
Level 1

Hi

I think that you will have to provide more information regarding the server itself  for now what would be abvious is if your server NIC support trunking than you need to configure the switch port to trunk

Regards

Mehdi

Reza Sharifi
Hall of Fame
Hall of Fame

If you are using the 3750 as a layer 3 device then you need to creat an SVI for each subnet

If the 3750 is a layer 2 device than you can bundle all your links using an Etherchannel using LACP

HTH

Sent from Cisco Technical Support iPhone App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: