05-05-2012 11:34 AM - edited 03-04-2019 04:16 PM
Scenario: I have a vmserver w four virtual servers all in configured w in different subnets. What's the best way to configure a 3750-x switch to route traffic from the virtual servers to their vlans?
Sent from Cisco Technical Support iPhone App
05-05-2012 01:14 PM
Hi
I think that you will have to provide more information regarding the server itself for now what would be abvious is if your server NIC support trunking than you need to configure the switch port to trunk
Regards
Mehdi
05-05-2012 01:19 PM
If you are using the 3750 as a layer 3 device then you need to creat an SVI for each subnet
If the 3750 is a layer 2 device than you can bundle all your links using an Etherchannel using LACP
HTH
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide