ā05-06-2012 03:30 AM - edited ā03-01-2019 05:34 PM
Hello Cisco experts.
While working with Cisco router with IOS 12.4(25b) I noticed that
I can configure "ipv6 host" that can contain multiple ipv6 addresses,
I would like to use it in ipv6 acl but it seems that I can't.
Is there syntax or IOS version that allow me to use "ipv6 host" in ipv6 acl?
thank you
Solved! Go to Solution.
ā05-12-2012 03:25 AM
Yes you can. ;-)
In this link is the syntax described to use a host as source or destination in an acl:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-sec_trfltr_fw.html#wp1072522
regards,
Leo
ā05-14-2012 05:36 AM
Hello Josef,
Here is another configuration example
IPv6 Traffic Filtering Access List Configuration Example
Regards,
Sunil.
ā05-12-2012 03:25 AM
Yes you can. ;-)
In this link is the syntax described to use a host as source or destination in an acl:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-sec_trfltr_fw.html#wp1072522
regards,
Leo
ā05-14-2012 05:36 AM
Hello Josef,
Here is another configuration example
IPv6 Traffic Filtering Access List Configuration Example
Regards,
Sunil.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide