05-07-2012 11:40 PM - edited 03-11-2019 04:03 PM
hi,
from internet client usint outlook is unable to connect on 465 port . i opened port on firewall over a public ip on outside interface. does any body have idea to fix this issue.
regards
rajat
05-07-2012 11:53 PM
Wats the software version your are using on the firewall and can you share the configuration???
Thanks,
Varun
05-07-2012 11:59 PM
i am using 7.0
Cisco Adaptive Security Appliance Software Version 7.0(7)
Device Manager Version 5.0(7)
Compiled on Fri 06-Jul-07 10:37 by builders
System image file is "disk0:/asa707-k8.bin"
Config file at boot was "startup-config"
KCO-ASA-BHARTI up 83 days 16 hours
Hardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
access-list 100 extended permit tcp any host x.x.x.x eq 465
access-list 100 extended permit tcp any host x.x.x.x eq smtp
static (DMZ,outside) x.x.x.x 192.168.100.182 netmask 255.255.255.255
regards
rajat
05-08-2012 12:27 AM
Hi Rajat,
The config look all good to me, try taking the captures, you can follow this doc for it:
https://supportforums.cisco.com/docs/DOC-17814
This would tell you which side is not responding and if the ASA is forwarding all the packets.
Thanks,
Varun
05-08-2012 01:52 AM
this is the issue with the port please check on port 465 need to enable command fixup protocol ? but i am not able to find impact of this command on firewall and other services running behind firewall
regards
rajat
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: