×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CME Night Service Date & Day

Unanswered Question
May 8th, 2012
User Badges:
  • Bronze, 100 points or more

I have a CME with the following night service config;


night-service date May 7 00:00 23:59

night-service weekday 17:00 09:00


Question I have is, at 00:00 on May 8, what happens?


Does night-service weekday 17:00 09:00 command take over at 00:00?


or will no night service be in place because night service ended at 23:59 on May 7 and will not enable again until may 8 at 17:00?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (2 ratings)
Loading.
Rob Huffman Tue, 05/08/2012 - 07:11
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi there,


This is not something I've tried but I did work with someone with a similar

(but not exact) query where the Night service did not kick in @ 00:00 on the

required day. It started back up again at 17:00 as in your example


https://supportforums.cisco.com/message/1112736#1112736



Cheers!

Rob




"Everything is broken" - Bob Dylan

Marwan Urabi Tue, 05/08/2012 - 11:46
User Badges:

Hi,


At 00:00 the night service will finish


You should make 7 May 09:01 - 09:00 (this will cover from 7 May until 8 May morning)

Weekday.                      17:00 - 09:00 ( this mean active from 5 PM until next day 09:00 AM )

                          so this will active from 6 May 05:00 PM until 7 May 09:00 AM .


like this you can cover all period .


If helpfully please rate .


Marwan


Sent from Cisco Technical Support iPhone App

Actions

This Discussion

Related Content