SRP541W Remote Web Access over IPSEC VPN

Unanswered Question
May 10th, 2012
User Badges:

I'm running FW 1.2.4 and I'm trying to figure out how to setup Remote Web Access over my IPSEC vpn tunnel.  I would like to be able to remotely access these routers and make configuration changes from my main office but I cannot seem to figure out how to get it to work.  If I try to access the internal router IP from across the VPN, I cannot.  My VPN tunnel is up and operational and I can ping various devices across the tunnel but I cannot access the web management of the router.

Thank you,


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Andrew Hickman Fri, 05/11/2012 - 03:47
User Badges:
  • Cisco Employee,

Hi Adam,

Are you using an IPSec tunnel, or remote access to the VPN server?  I just tried v1.2.4(003) and was able to connect with my VPN client and access the SRP web interface by accessing the LAN IP ( by default).

Alternatively, you could manage the SRP remotely using HTTPS.


parallaxtech Fri, 05/11/2012 - 05:04
User Badges:

I'm using an IPSEC tunnel.  I can see other devices connected to my router but I cannot get to my router.


Andrew Hickman Fri, 05/11/2012 - 07:11
User Badges:
  • Cisco Employee,

Ok - yes, this was a known issue and it has been addressed for future releases.

parallaxtech Fri, 05/18/2012 - 06:28
User Badges:


Would this problem be the same reason why I cannot setup a voice module to connect to a phone server across the VLAN tunnel?



This Discussion

Related Content