×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Conference-Xcode-MTP with voice register global

Answered Question
May 13th, 2012
User Badges:

Hi,

I have an sip only environment. 2901-CME with 3905 sip phones. No sccp phones.

Are confb, xcode and mtp possible ?

How can I configure trancoding, mtp and conf ?.

Which is the equivalence to telephony-service->sdspfarm transcode .......

How setup ad-hoc and meetme conference?


Thanks.

Correct Answer by Chris Deren about 5 years 3 months ago

You are correct, you need telephony-service in order to register the SCCP media resources.


Chris

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Chris Deren Mon, 05/14/2012 - 10:03
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Sure, remember CME is a protocol translator so you can have SIP phones and SCCP feature, i.e. conference bridges, check out CME admin guide for configuration examples:


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html#wp1010505


HTH,


Chris

Rafael Jimenez Mon, 05/14/2012 - 10:14
User Badges:

Thanks for your answer,


if the cme solution is 100% sip (phones and trunks), in order to setup xcode, conf, etc, telephony-service section is requiered. Its fine or wrong this conclusion?.

Thansk.

Correct Answer
Chris Deren Mon, 05/14/2012 - 10:27
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

You are correct, you need telephony-service in order to register the SCCP media resources.


Chris

Actions

This Discussion