Solved: Conference-Xcode-MTP with voice register global

Rafael Jimenez · ‎05-13-2012

Hi,

I have an sip only environment. 2901-CME with 3905 sip phones. No sccp phones.

Are confb, xcode and mtp possible ?

How can I configure trancoding, mtp and conf ?.

Which is the equivalence to telephony-service->sdspfarm transcode .......

How setup ad-hoc and meetme conference?

Thanks.

Chris Deren · ‎05-14-2012

You are correct, you need telephony-service in order to register the SCCP media resources.

Chris

View solution in original post

Rafael Jimenez · ‎05-14-2012

I dont know if mi questions are valid, but any ideas?

Thanks.

Chris Deren · ‎05-14-2012

Sure, remember CME is a protocol translator so you can have SIP phones and SCCP feature, i.e. conference bridges, check out CME admin guide for configuration examples:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html#wp1010505

HTH,

Chris

Rafael Jimenez · ‎05-14-2012

Thanks for your answer,

if the cme solution is 100% sip (phones and trunks), in order to setup xcode, conf, etc, telephony-service section is requiered. Its fine or wrong this conclusion?.

Thansk.

Chris Deren · ‎05-14-2012

You are correct, you need telephony-service in order to register the SCCP media resources.

Chris