Simultaneous Ring - voice hunt-group does not work

Answered Question
May 13th, 2012
User Badges:

Hello all,


I have the request for simultaneous ringing while using a CME v 7.0, however the following configuration doesnt work:


!

voice hunt-group 2 parallel

final 3201

list 3201,85201,5201

pilot 5201

!


What we want is when someone calls 5201 to ring simultaneously to 5201, 3201 and 85201.



Any suggestions?


Many thanks in advance

Correct Answer by Chris Deren about 5 years 2 months ago

What I am suggesting is that you cannot have hunt pilot and ephone-dn with the same DN as that creates a conflict and ephone-dn I believe will always be prioritized.  You need to either change the pilot DN to be something else or the ephon-dn to be something else.


Chris

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
Chris Deren Sun, 05/13/2012 - 12:17
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Your best option would be to configure shared line appearance on the phones with ephone-dn 5201. If you do require hunt group then the pilot cannot be shared with another ephone-dn, you have both 5201 defined as pilot and a member.


HTH,


Chris

Georgios Sotiro... Sun, 05/13/2012 - 13:45
User Badges:

Hello Chris, thanks for your reply


So what you suggest is to remove the dn 5201 from a member? For example,


voice hunt-group 2 parallel

final 3201

list 3201,85201

pilot 5201


ephone-dn  1

number 5201

label 5201

name George

description George



I think i have tried that already  and didnt work, is the above what you suggest to do?


Again thanks for your prompt response

Correct Answer
Chris Deren Sun, 05/13/2012 - 15:54
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

What I am suggesting is that you cannot have hunt pilot and ephone-dn with the same DN as that creates a conflict and ephone-dn I believe will always be prioritized.  You need to either change the pilot DN to be something else or the ephon-dn to be something else.


Chris

Actions

This Discussion

Related Content