05-14-2012 01:44 AM - edited 07-03-2021 10:09 PM
Hello,
I have two cisco 1300 series bridge/access point, i need to connect this two brigde with wireless connection, is there any guide for this, please
thank you
05-14-2012 02:27 AM
this should be helpful to you:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml
this is also a list of all config examples that you may find useful:
http://www.cisco.com/en/US/products/ps5861/prod_configuration_examples_list.html
hope this helps.
Amjad
05-14-2012 04:58 AM
You can send the current show tech from both sides as well as the switches that are directly connected to both bridges and highlight the switchports connecting them to vierify if your configuration is correct or wrong.
05-14-2012 10:37 PM
Here is one more useful example:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: