cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1803
Views
0
Helpful
2
Replies

How to active IPS on an ASA 5510

dchavarria
Level 1
Level 1

Hi,

How to activated IPS in an ASA 5510 and then to change de IP address that comes by default, thank you for your help.

David Chavarria.

2 Replies 2

sawgupta
Level 1
Level 1

Use the "session 1" command from ASA. It will open a IPS session. If this is the first time you are accessing IPS, it will open the setup wizard. Otherwise, you may simply issue "setup" command on IPS CLI.

In the setup wizard, you can configure the management IPS address.

http://www.cisco.com/en/US/docs/security/asa/asa84/asdm64/configuration_guide/modules_ips.html#wp1170445

Regards,

Sawan Gupta

Thanks & Regards, Sawan Gupta

Todd Pula
Level 7
Level 7

Here are a fiew VoDs that walk you through the process:

https://supportforums.cisco.com/docs/DOC-12233#comment-6554

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: