VSMS Server startup error

Answered Question
May 15th, 2012

Hi all,

I am receiving this output when my client reboots a server (see photo attached).

Does anyone have a suggestion?

Regards,

Nicos Nicolaides.

Attachment: 
I have this problem too.
0 votes
Correct Answer by Gerald Burgess about 1 year 11 months ago

The raid controllers we have in our servers don't have the battery backup option installed, so that message comes up when you reboot them.

you would use this command to turn that error off:

MegaCli -AdpSetProp BatWarnDsbl -a0

I have a doc up on support forums that might help:

https://supportforums.cisco.com/docs/DOC-16309

Hopefully that takes care of it for you.

Cheers!

  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 5 (2 ratings)
Correct Answer
Gerald Burgess Tue, 05/15/2012 - 15:07

The raid controllers we have in our servers don't have the battery backup option installed, so that message comes up when you reboot them.

you would use this command to turn that error off:

MegaCli -AdpSetProp BatWarnDsbl -a0

I have a doc up on support forums that might help:

https://supportforums.cisco.com/docs/DOC-16309

Hopefully that takes care of it for you.

Cheers!

Nicos Nicolaides Tue, 05/22/2012 - 03:46

Hi Gerald,

I have tried this command but it outputs the following error:

VSMS1:/opt/MegaRAID/MegaCli # ./MegaCli -AdpSetProp BatWarnDsbl -a0

Invalid input at or near token -a

Anyway, i have rebooted the server and disabled the message from the BIOS.

Thank you for your support

kevin.bentley Tue, 08/14/2012 - 10:21

Just so everyone knows, the correct synax

to enable: ./MegaCli -AdpSetProp BatWarnDsbl 1 -a0

to disable: ./MegaCli -AdpSetProp BatWarnDsbl 0 -a0

Several months later, this may not be of help, but hopefully so for others who are looking for this info.

Actions

Login or Register to take actions

This Discussion

Posted May 15, 2012 at 2:04 AM
Stats:
Replies:3 Avg. Rating:5
Views:979 Votes:0
Shares:0

Related Content

Discussions Leaderboard