to add vlan group for Fwsm

Answered Question
May 23rd, 2012

Hi,

i have fwsm in cat6500, i have one firewall vlan group which is in firewall module 1 vlan group 10. I need tocreate another vlan group and add to firewallmodule 1 vlan group 10, 20. i need to have zero downtime. how can i do it? peter

Sent from Cisco Technical Support iPhone App

I have this problem too.
0 votes
Correct Answer by varrao about 2 years 10 months ago

Hi,

you would just need to add the command:

6506-SUP720(config)#firewall module 1 vlan-group 20

and when after you do:

show run | sec firewall

The output would show:

firewall module 1 vlan-group 10,20

It doesn't need any downtime.

Thanks,
Varun Rao
Security Team,
Cisco TAC

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Correct Answer
varrao Wed, 05/23/2012 - 13:48

Hi,

you would just need to add the command:

6506-SUP720(config)#firewall module 1 vlan-group 20

and when after you do:

show run | sec firewall

The output would show:

firewall module 1 vlan-group 10,20

It doesn't need any downtime.

Thanks,
Varun Rao
Security Team,
Cisco TAC

pslavkovsky Thu, 05/24/2012 - 03:13

thank you, i did it at morning, comunication via fwsm was broken aprroximatlly for 3seconds

Sent from Cisco Technical Support iPhone App

Actions

Login or Register to take actions

This Discussion

Posted May 23, 2012 at 1:31 PM
Stats:
Replies:2 Overall Rating:5
Views:453 Votes:0
Shares:0
Tags: No tags.
 

Discussions Leaderboard

Rank Username Points
1
Jouni Forss
8,441
2
Julio Carvajal
6,228
3
Jon Marshall
3,370
4
Marvin Rhoads
2,523
5
Marius Gunnerud
1,721
Rank Username Points
Jon Marshall
60
Marius Gunnerud
48
Marvin Rhoads
29
Karsten Iwen
25
Andre Neethling
15