cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
913
Views
0
Helpful
2
Replies

to add vlan group for Fwsm

pslavkovsky
Level 1
Level 1

Hi,

i have fwsm in cat6500, i have one firewall vlan group which is in firewall module 1 vlan group 10. I need tocreate another vlan group and add to firewallmodule 1 vlan group 10, 20. i need to have zero downtime. how can i do it? peter

Sent from Cisco Technical Support iPhone App

1 Accepted Solution

Accepted Solutions

varrao
Level 10
Level 10

Hi,

you would just need to add the command:

6506-SUP720(config)#firewall module 1 vlan-group 20

and when after you do:

show run | sec firewall

The output would show:

firewall module 1 vlan-group 10,20

It doesn't need any downtime.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks,
Varun Rao

View solution in original post

2 Replies 2

varrao
Level 10
Level 10

Hi,

you would just need to add the command:

6506-SUP720(config)#firewall module 1 vlan-group 20

and when after you do:

show run | sec firewall

The output would show:

firewall module 1 vlan-group 10,20

It doesn't need any downtime.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks,
Varun Rao

thank you, i did it at morning, comunication via fwsm was broken aprroximatlly for 3seconds

Sent from Cisco Technical Support iPhone App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: