05-23-2012 01:31 PM - edited 03-11-2019 04:10 PM
Hi,
i have fwsm in cat6500, i have one firewall vlan group which is in firewall module 1 vlan group 10. I need tocreate another vlan group and add to firewallmodule 1 vlan group 10, 20. i need to have zero downtime. how can i do it? peter
Sent from Cisco Technical Support iPhone App
Solved! Go to Solution.
05-23-2012 01:48 PM
Hi,
you would just need to add the command:
6506-SUP720(config)#firewall module 1 vlan-group 20
and when after you do:
show run | sec firewall
The output would show:
firewall module 1 vlan-group 10,20
It doesn't need any downtime.
Thanks,
Varun Rao
Security Team,
Cisco TAC
05-23-2012 01:48 PM
Hi,
you would just need to add the command:
6506-SUP720(config)#firewall module 1 vlan-group 20
and when after you do:
show run | sec firewall
The output would show:
firewall module 1 vlan-group 10,20
It doesn't need any downtime.
Thanks,
Varun Rao
Security Team,
Cisco TAC
05-24-2012 03:13 AM
thank you, i did it at morning, comunication via fwsm was broken aprroximatlly for 3seconds
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: