05-24-2012 06:23 PM - edited 07-03-2021 10:12 PM
Hi,
What is the ideal way to check connectivity & wireless strength between mesh devices like root acces point and maps, work group bridges.
this is to verify if the devices are able to transmit optimally in case there is any hard obstructing surfaces or sight problems.
Please suggest.
Thanks .
Solved! Go to Solution.
05-28-2012 12:26 AM
If you have WCS you can use it. You can check mesh links health.
From WCS go to Monitor->Access Points. then click on your AP name then click on your AP radio type.
see the image below.
If you don't have WCS it will be harder. You can ssh to the AP and issue some commands like:
- show mesh adjacency all.
- show mesh status.
HTH
Amjad
05-28-2012 12:26 AM
If you have WCS you can use it. You can check mesh links health.
From WCS go to Monitor->Access Points. then click on your AP name then click on your AP radio type.
see the image below.
If you don't have WCS it will be harder. You can ssh to the AP and issue some commands like:
- show mesh adjacency all.
- show mesh status.
HTH
Amjad
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide