×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco 3750V2 switch in rommon mode

Unanswered Question
May 27th, 2012
User Badges:

Dear all,


I am having big problem with cisco 3750V2 switch, the switch in rommon mode now, I have try to upgrade through Xmodem but no.


I have attached here the log file and scren shot file, is here any one who knows how to upgared rommon mode switch,

please have look on my case and support me.



Advance Thanks,

AHOSSAIN

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
soroushm Sun, 05/27/2012 - 14:34
User Badges:
  • Gold, 750 points or more

Hi,


try the following steps:


** Try a higher BAUD rate (switch: set BAUD 115200), restart your Terminal App and use the new baud rate. then retry.


** If you are using USB ports from PC, try a different port.


** Sometimes, on some PC's, USB Convertors crash in the middle of the process, although they seem good at the begining. try a different PC or Convertor.



plz Rate if it helped.


Soroush.

Leo Laohoo Sun, 05/27/2012 - 15:07
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

The reason why you are getting this error message is because the appliance is waiting for the Upload but there's nothing coming.


Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image

Reza Sharifi Sun, 05/27/2012 - 17:27
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

Referencing the message below, you probably have bad flash card, because the copy starts and than stops.


switch: copy xmodem: flash:c3750-ipbasek9-mz.150-1.SE2.bin

Begin the Xmodem or Xmodem-1K transfer now...

CCCCCCCCCCxmodem:: I/O error


HTH

Mohammad Anowar... Sun, 05/27/2012 - 23:48
User Badges:

Dear,


I have try all this but no, kindly anyone support me how can I solve out this problem.



Thanks

AHOSSAIN

Ivan Shirshin Mon, 05/28/2012 - 00:54
User Badges:
  • Cisco Employee,

Hi Ahossain,


I have done a bit of research on this issue and there are the following possibles causes:


1. Forgot to do a flash_init to initialise the filesystem before loading the image. Did you follow this step-by-step instructions?

http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml


2. Corrupted image  - check it with /verify command on a working router.


3. Corrupted flash - re-format it.


4. Terminal application issues, e.g. I saw same issue when using Tera Term while HyperTerm worked fine - trying another terminal app.


5. Faulty HW - switch replacement.


Please let us know which steps you have tried.


Kind Regards,
Ivan

**Please grade this post if you find it useful.

Mohammad Anowar... Mon, 05/28/2012 - 01:05
User Badges:

Sorry still problem '' The system is unable to boot automatically. The BOOT environment variable needs to be set to a bootable image." another " Error loading "flash:image.bin"


Please help me in this case.


Thanks

AH

Ivan Shirshin Mon, 05/28/2012 - 01:13
User Badges:
  • Cisco Employee,

Hi,


Are you booting from ROMMON using "boot" command? Did you specify the full path to the file? E.g. "boot flash:image.bin".


Please copy here the full console output starting from boot command.


Kind Regards,
Ivan

**Please grade this post if you find it useful.

Leo Laohoo Mon, 05/28/2012 - 15:08
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

The system is unable to boot automatically. The BOOT environment variable needs to be set to a bootable image." another " Error loading "flash:image.bin"

Console into the switch and reload.  Post the entire bootup process.

Mohammad Anowar... Tue, 05/29/2012 - 03:06
User Badges:

Dear all,


finaly i have successfully recovering rommon mode, thanks everyone.


thanks

ahossain

Actions

This Discussion