cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1185
Views
0
Helpful
10
Replies

Does 2801 router support SPA50x phones?

firestormnet
Level 1
Level 1

Hi All.

We've got a 2801 router CME4.2 and I'm trying to use SPA502G phone with it. Phone shows "Registering" only, and the router shows "

046585: May 28 09:03:16.224: TFTP: Looking for /SPA502G-cfg.xml".

Does this router support SPA50x phones?

If it does what am I missing there? Some files on a flash (I uploaded only .bin file there)?

Where can I get a list of files which should be uploaded to the router's flash?

Thanks.

Regards,

10 Replies 10

paolo bevilacqua
Hall of Fame
Hall of Fame

No.

SPA phones in SPCP mode are supported on the UC500 only.

Thanks Paolo.

That's what I thought as I couldn't find anything.

Regards,

hello

Does SPA502G in SIP mode working with Cisco 2901 voice CCME 9.1?

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3

Hi.

Being a Sip based phone, yes it works

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"

Thanks Carlo for your reply.

I can not change the phone from SCSP to SIP mode from its menu.

Can we change between sip and scsp on that phone? Or default it will boot up with sip?

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3

Hi

SPA 502 default is SIP

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"

Could you please have a look at the CCME configs. Am i missing any command? Currently the SPA502G can obtain its IP address but it can not register with the CCME.

***

voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

no supplementary-service sip moved-temporarily

no supplementary-service sip refer

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw

sip

bind control source-interface GigabitEthernet0/0.2

bind media source-interface GigabitEthernet0/0.2

registrar server expires max 600 min 60

!

voice class codec 1

codec preference 1 g711ulaw

codec preference 2 g711alaw

codec preference 3 g729r8

codec preference 4 g729br8

codec preference 5 clear-channel

!

voice register global

mode cme

source-address 10.9.206.2 port 5060

max-dn 200

max-pool 42

load 7942 SIP42.9-3-1SR2-1S

authenticate register

mwi stutter

voicemail 7400

tftp-path flash:

file text

create profile sync 0393213362631131

!

voice register dn 30

number 4030

no-reg

!

voice register dn 31

number 4031

allow watch

name Shop Floor 1

label Shop Floor 1

!

voice register pool 30

id mac ECE1.A9CD.0723

number 1 dn 30

dtmf-relay rtp-nte

voice-class codec 1

username 4030 password 4030

!

interface GigabitEthernet0/0.2

description gateway of vlan 2

encapsulation dot1Q 2

ip address 10.9.206.2 255.255.255.0

ip helper-address 10.9.205.65

h323-gateway voip interface

!

!

tftp-server flash0

tftp-server flash:term42.default.loads

tftp-server flash:SIP42.9-3-1SR2-1S.loads

tftp-server flash:jar42sip.9-3-1ES13.sbn

tftp-server flash:apps42.9-2-1TH1-13.sbn

tftp-server flash:cnu42.9-2-1TH1-13.sbn

tftp-server flash:cvm42sccp.9-2-1TH1-13.sbn

tftp-server flash:dsp42.9-2-1TH1-13.sbn

tftp-server flash:jar42sccp.9-2-1TH1-13.sbn

tftp-server flash:SCCP42.9-2-1S.loads

tftp-server flash:term62.default.loads

tftp-server flash:cue-installer.SPA.sme.8.6.6

tftp-server flash://cucme-mlpp

tftp-server flash:apps42.9-3-1ES13.sbn

tftp-server flash:cnu42.9-3-1ES13.sbn

tftp-server flash:cvm42sip.9-3-1ES13.sbn

tftp-server flash:dsp42.9-3-1ES13.sbn

tftp-server flash:spa50x-30x-7-5-5.bin

tftp-server flash:/its

!

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3

Hi.

When you add a new register profile, remember to issue create profile under voice register global.

Than.. Have you configured correclty Authentication parameters on SPA Phone?

Please activate a debug voice register error and debug voice register evens and post the output.

Thanks

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"

log into the console port. turn on those two debug commands. Unplug the phones and then plug in. Unfortunately, i got now debug messages.

SHould i copied some firmware files of the 502G into the router flash?

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3

it works now.

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: