×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Tandberg E20 with Other Cisco IP Telephone One way voice probmlem

Answered Question
May 29th, 2012
User Badges:

Hello,


I have E20 Tandberg  version TE-4.1.1, register with sip it can send and receive outbound calls,


When i try local call 7911,7965,7945,9971 ip telephone  i can not hear voice,

Therefore,When i calls local ip phone one way voice problem, but outbound calls working normally


Thanks  a lot,

Correct Answer by acampbell about 5 years 2 months ago

Hi,


Check that their is both way IP routing between the VLAN for the IP phones and the VLAN for the Tandberg.





Regards,
Alex.
Please rate useful posts.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
acampbell Tue, 05/29/2012 - 05:40
User Badges:
  • Green, 3000 points or more

Hi,


Check that their is both way IP routing between the VLAN for the IP phones and the VLAN for the Tandberg.





Regards,
Alex.
Please rate useful posts.

M.Kemal YENIGUN Tue, 05/29/2012 - 07:02
User Badges:

Hello,


I checked it, E20 and other phone different vlan,

E20:192.168.166.0

other ip phone : 192.168.164.0 (voice vlan)


E20 does not register via voice vlan,

acampbell Wed, 05/30/2012 - 06:01
User Badges:
  • Green, 3000 points or more

Hi,


Have you made sure that you can ping both ways beween these Ip subnets.




Regards,
Alex.
Please rate useful posts.

acampbell Wed, 05/30/2012 - 07:35
User Badges:
  • Green, 3000 points or more

Hi,


You will need to find out what does the layer 3 ip routing between the subnets.


Is it a router , layer3 switch or a firewall etc



Regards,
Alex.
Please rate useful posts.

Actions

This Discussion

Related Content