Dynamic multipoint vpn network

Unanswered Question
May 30th, 2012

Hi team we have 6 locations connected through the dynamic multipoint pvn network, we are using this network for voip phones, some this whole vpn network goes down, and than come back automatically after some time, i was logged in to hub router and found some errors, thse errors are as follow, can any body suggest what is the cause for those

000176: May 30 09:44:29.763 PCTime: %CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd I

PSEC packet has invalid spi for destaddr=hub wap ip, prot=50, spi=0xAEB1655C(

2930861404), srcaddr=remote 2 wan ip

000177: May 30 09:45:33.149 PCTime: %CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd I

PSEC packet has invalid spi for destaddr=hub wap ip, prot=50, spi=0xAEB1655C(

2930861404), srcaddr=remote 2 wan ip

000178: May 30 09:46:39.141 PCTime: %CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd I

PSEC packet has invalid spi for destaddr=hub wap ip, prot=50, spi=0xAEB1655C(

2930861404), srcaddr=remote 2 wan ip

i replaced all IP addreses with there locations, i have those errors form almst all locations

regards

krishan saran

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
malhyari Sat, 06/02/2012 - 12:23

HI Krishan ,

thanks for posting this here .

this may indicate a syhcronization issue between the two peers , that one peer is still using an old SA that has been deleted on the other peer , thus when receiving the IPSEC packet on the device it will report that there is no IPSEC sa active for this connection .

The received IPsec packet specifies a Security Parameters Index (SPI) that does not exist in the security associations database (SADB). This could be a temporary condition due to:

  • Slight differences in the aging of security associations (SAs) between the IPsec peers
  • The local SAs having been cleared
  • Incorrect packets sent by the IPsec peer

do you have crypto isakmp keepalives enabled on the devices ?

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtdpmo.html

on the other hand you need to check why the VPN tunnels are going down ?

Debug crypto isakmp

debug crypto ipsec

hope that this helps.

cheers.

Mohammad.

krishan.saran Sun, 06/03/2012 - 00:27

Thanks mohamed, thats make sence, i will check the timers in all routers and update back,

Thanks

Krishan Saran

Uniconnect Networks Inc.

Ph. 604-235-1965

Cell 778-840-5961

www.uniconnectnetworks.com

Actions

Login or Register to take actions

This Discussion

Posted May 30, 2012 at 11:41 AM
Stats:
Replies:2 Avg. Rating:
Views:357 Votes:0
Shares:0

Related Content

Discussions Leaderboard