×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

LMS 4.2, User Tracking Utility

Unanswered Question
May 31st, 2012
User Badges:

                   Hello everyone;

I had a new installation of LMS 4.2 and everythinks works fine but User trucking utility database has an empty host name / IP address. Any one knows the reason why this information is not polled ?


Thanks

Alina Andiraos

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Mo'ath Al Rawashdeh Thu, 05/31/2012 - 06:23
User Badges:
  • Bronze, 100 points or more

Hi Alina,


Seems that you have configured SNMP V3 on your devices. If this is the case, the command below will be required for every VLAN on every device running SNMP V3:


snmp-server group group_name v3 auth context vlan-vlan_id


example:


snmp-server group LMS v3 auth context vlan-1


snmp-server group LMS v3 auth context vlan-2


Have a good day.


Moath Rawasheh

Actions

This Discussion

Related Content