×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

SPA525G - (h/w version 2.1.0) Consult Transfer using SPA500S console not working - Fixed in 7.5.1a

Unanswered Question
May 31st, 2012
User Badges:

Hello,


When we try to do a consult transfer using the BLF keys on console, nothing is happening. This is apparent only on newer H/W version 2.1.0. The firmware used is 7.4.9c.


I have got a SPA525 on 2.0.0 h/w version in my lab and its working fine on it and Its working fine on SPA50x as well.


Has anyone else got this issue. If this a bug in newer Hardware version, when do you expect to be fixed.


Regards


Robert

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
robert.arokiasamy Thu, 05/31/2012 - 02:41
User Badges:

Here is the screenshot from the device info page.



Product Information
Product Name:SPA525G2Serial Number:CBT15380JQN
Software Version:7.4.9cHardware Version:2.1.0
MAC Address:708105B37074Client Certificate:Installed
Customization:OpenLicenses:None



Regards


Robert

robert.arokiasamy Thu, 05/31/2012 - 03:16
User Badges:

Hello,


I contacted the support centre and they confirmed that there is a new firmware released in April.Release 7.5.1


I have downloaded that and tested it and can confirm that it has resolved the below issue


Regards


Robert

Actions

This Discussion