ASA Authenticate IPv6 traffic

Unanswered Question
May 31st, 2012
User Badges:

Hello community,


configuring our ASA5585 running on latest software version for IPv6,

I faced the issue that I wasn't able to translate the "aaa authentication match " configuration to the IPv6 pendant.


Currently I have someting like:

access-list AUTH extended permit ip any host 10.0.0.1

aaa authentication match AUTH outside users



now I tried to configure something like in addition:

ipv6 access-list AUTHv6 permit ip any host 2001:db8::1

aaa authentication match AUTHv6 outside users




But I get the error, that AUTHv6 is not a extended access-list. But IPv6 access-lists are not extended anymore.


Question, how can I make the ASA to authenticate traffic for IPv4 and IPv6 in parallel?



Cheers Alex

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
JensWeibler Sun, 06/10/2012 - 13:41
User Badges:

As far as I know cut through authentication is not supported with ipv6.. sadly

Actions

This Discussion

Related Content