Downgrading WLCM soft on ISM-SRE-300

Unanswered Question
Jun 2nd, 2012
User Badges:

Hello!


My aim is to downgrade the WLCM soft on ISM-SRE-300 from 7.0.230 to 7.0.220 release


there is the doc about installing the WLC software on SRE

http://www.cisco.com/en/US/docs/wireless/controller/controller_modules/sre/installation/guide/wlcsreinst.html#wp1054606


I couldn't find any special information about up/downgrading WLCM soft on ISM-SRE-300

It it enough to follow the instructions from http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_220_0.html#wp784198 ?


In WLC-SRE installation packet there are many files, not just .aes and there is no ER.aes.


Do i need to install soft from cli with the following command?

service-module sm 3/0 install url ftp://123:[email protected]/AIR-SRE-K9-7.0.115.0.aes


Or is it enough to upload only .eas file from the GUI?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Saravanan Lakshmanan Mon, 06/04/2012 - 13:34
User Badges:
  • Cisco Employee,

If the SRE already got any WLC image then use WLC's GUI/CLI to upload the code to SRE. SRE doesn't use ER image.


http://www.cisco.com/cisco/software/release.html?mdfid=283848372&flowid=24843&softwareid=280926587&release=7.2.110.0&relind=AVAILABLE&rellifecycle=ED&reltype=latest


Cisco Wireless Controller on SRE for ISR G2 Release 7.0 Upgrade Software.

AIR-WLC-SRE-K9-7-0-220-0.aes

Actions

This Discussion

Related Content