×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Ryan Gadwood Mon, 06/04/2012 - 09:44
User Badges:
  • Cisco Employee,

ffyyocum,


You can put either MSPP or MSTP software on the TCC3 card depending on your application. The latest is 9.4.0.1 is out for MSTP and 9.2.1.3 is out for MSPP. I believe after 9.2 for the MSTP you need to download the lite versions if you have a TCC3. It will state this on the software download page. You can find the download software page at the link below. You'll need a valid Cisco username/password and software license to download which will be stated on the download page.


http://www.cisco.com/cisco/software/navigator.html?mdfid=268437886&flowid=304


Hope this can get you started in the right direction.


Ryan

Actions

This Discussion

Related Content