help on bgp config

Unanswered Question
Jun 5th, 2012
User Badges:

on router name as chic there are two links one is for outgoing and one for incoming.ie  for local prefernce 600 is used for outgoing and 300 for

incoming.





int fa0/1

ip add          202.124.x.19



int fa0/0

203.x.x.29





router bgp 4xxx

neighbor 202.124.x.x remote-as 95xx

neighbor 125.17.x.x  remote-as 18xx







neighbor 202.124.x.x route-map RELIANCE-IN in

  neighbor 202.124.x.x route-map RELIANCE-OUT out



neighbor 125.17.x.x route-map AIRTEL-IN in

  neighbor 125.17.x.x route-map AIRTEL-OUT out





  no synchronization

  network 203.x.x.x/24







ip prefix-list DEFAULT seq 5 permit 0.0.0.0/0





ip prefix-list AIRTEL-OUT seq 5 permit 203.x.x.0/24



ip prefix-list RELIANCE-OUT seq 5 permit 203.x.x.0/24





route-map AIRTEL-IN permit 10

match ip address prefix-list DEFAULT

set local-preference 300





route-map RELIANCE-IN permit 10

match ip address prefix-list DEFAULT

set local-preference 600





-----------------------------------------------------------------------------------------------------------









On other router name as sa only one link is terminated.for incoming and outgoing



Note router chic and sa are in same company but there are not connected to each other.



router chic is used for diffrent vlan and router sa is used for diffrenrt vlan but incoming traffic is adversiteed as

203.x.x.x on both router.





Problem- when router sa is turned on trffic coming at router chic is geeting affected.sudeen all the tunnels are geeting affected.



browsing also geeting affected.

Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Vivek Ganapathi Tue, 06/05/2012 - 01:30
User Badges:
  • Silver, 250 points or more

Hi Prashanth,


Not clear about the setup. Is it possible to provide a topology ?

Actions

This Discussion

Related Content