×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CTS and Codian 4500 MCU

Unanswered Question
Jun 8th, 2012
User Badges:

Hi,


I saw an information about interoperability for CTS series and Codian MCU 4500. It says CTS supports Codian MCU 4500. Actually I am surprised. I used to know it is possible to make a multipoint conference with CTSes on only TPS server or CTMS. Could you please clarify this issue? Does the CTS support to connect the Codian 4500 MCU? If so what are the limitations?


Best regards,

Tufan

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Tomonori Taniguchi Fri, 06/08/2012 - 01:09
User Badges:
  • Cisco Employee,

CTS do support standard H.264 video capability from software 1.7.4 release.

CTS-4500 series MCU connection use this standard H.264 capability not TIP.

Please note version 1.7.4 is early phase release for this interop and has improved interop level in newer version.

More detail information is available on CTS release note and interop document.

Luc Hands Fri, 06/08/2012 - 02:07
User Badges:
  • Cisco Employee,

As the MCU 4500 series does not support TIP there are several limitations, including;

   - no support for multi-screen systems, so e.g. CTS3000 will connect with one screen only

   - no support for Roster list

   - no support for locking conference

   - lower maximum resolution support than in TIP mode

Actions

This Discussion