×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Re:Can 2911 Router work on IOS other than Universal Image

Unanswered Question
Jun 10th, 2012
User Badges:

Hello All,


Please let me know whether a Cisco Router 2911 would work on images other than universal image. This is the question raised by one of our customer. He has 2811 Router where-in he has configured T1/E1 configuration, terminated to Zyxel Modem and working fine. Now he wants to replace this 2811 router with 2911 router. Since the universal image in 2911 router is not working with the present configuration in 2811 router, he wants to know, what options are there for him to configure this in 2911.


Thank you for your response in advance!!!!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Sun, 06/10/2012 - 23:10
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Depends on what feature set the 2811 and the 2911 are using now.


For the 2911, kindly post the output to the command "sh license".

CSCO11776584 Tue, 06/12/2012 - 22:46
User Badges:

Hello Leo,


Let me reframe my question.


Topology consisted of router 2911 on Site A. This router is connected to 2 other routers on Site B and Site C. On Site B, router 2811 is present and on Site C, Zyxel router is present. All are connected through T1/E1 cloud. Connectivity between Site A and Site B is working(Cisco to Cisco), but between Site A and Site C(Cisco to Zyxel) is not working. Please let me know any info you need.



Regards,

Prashant K

Actions

This Discussion