Internet through VPN problem.

Unanswered Question
Jun 12th, 2012

Hello. I have a problem configuring a vp n client to work with internet through the vpn. I have made the following config (to couple it with a ZBF config) and when i connect with the vpn client i can only browse https websites (port 443). Port 80 seems to work, it NAT's but i always get a pae cannot be displayed. Any help will be great. Thanks a lot,

!

!

crypto isakmp policy 1

encr 3des

authentication pre-share

group 2

crypto isakmp key XXXXX address 0.0.0.0 0.0.0.0

crypto isakmp keepalive 10

!

crypto isakmp client configuration group cisco

key XXXXX

dns 172.16.10.1

pool VPN-Pool

netmask 255.255.255.248

crypto isakmp profile VTI

   match identity group cisco

   isakmp authorization list default

   client configuration address respond

   virtual-template 1

!

!

crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

!

crypto ipsec profile vti

set transform-set ESP-3DES-SHA

set isakmp-profile VTI

!

!

!

!

interface Virtual-Template1 type tunnel

ip unnumbered Loopback0

ip nat inside

ip virtual-reassembly in

ip tcp adjust-mss 1412

tunnel source Dialer0

tunnel mode ipsec ipv4

tunnel protection ipsec profile vti

!

!

!

!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)

Actions

Login or Register to take actions

This Discussion

Posted June 12, 2012 at 4:43 AM
Stats:
Replies:0 Avg. Rating:
Views:331 Votes:0
Shares:0

Related Content

Discussions Leaderboard