×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Call Manager Express - call forwarding question

Unanswered Question
Jun 13th, 2012
User Badges:

Is there a way to have the CME in a call forward all situation, pass the pstn ani to the external phone? I'm assuming no since it's a 2nd leg of the call ..

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
omerpal1190 Wed, 06/13/2012 - 07:15
User Badges:

yes, under ephone-dn you can configure following commands


call-forward busy XXXX

call-forward noan XXXX timeout 10



CLID service is enabled from your telco?

Michael Adams Wed, 06/13/2012 - 07:29
User Badges:

Caller (ANI) is 512-622-1000 inbound call from PSTN to (DNIS) 512-655-9999


Call forward all has been set on extension 9999 - this forwards to 512-500-5000


When the call is forwarded - I'd like to see  512-622-1000 show up as the calling number rather than 512-655-9999


I understand that 9999 is creating a new leg of the call and I think it's operating as expected, however I'm not sure if there is a way to override it.

Michael Adams Wed, 06/13/2012 - 07:49
User Badges:

We're talking like 100 phones who possibly do a call forward... I cant justify creating 100 dialpeers -- we have a main outgoing dialpeer that would also be matched

Michael Adams Thu, 07/26/2012 - 07:20
User Badges:

This has been resolved. Thanks


There was a translation rule hijacking the ANI

Actions

This Discussion