06-14-2012 02:45 AM - last edited on 03-25-2019 05:48 PM by ciscomoderator
Dear Support
I have ASA 5520 using ios 8.2(2)
I received a new ASA 5550 and want to transfert my config from 5520 to 5550,
How can i do this?
Regards
Solved! Go to Solution.
06-14-2012 04:01 AM
Hi,
I think this should be fairly straightforward (may be shot down in flames here!!).
Install same versions of ASA and ASDM software on new ASA (5550).
Backup config of 5520
Load backed up config on to new 5550
Test
As long as the versions are the same I believe the configs should run on either system. You will obviously have to setup the new one "offline" (not plugged into your live environment) as you will get IP conflicts and cause yourself all sorts of issues!!
I stand to be corrected on all of the above as I have never done this myself but, in theory, I think it should work fine.
Tim
06-14-2012 04:01 AM
Hi,
I think this should be fairly straightforward (may be shot down in flames here!!).
Install same versions of ASA and ASDM software on new ASA (5550).
Backup config of 5520
Load backed up config on to new 5550
Test
As long as the versions are the same I believe the configs should run on either system. You will obviously have to setup the new one "offline" (not plugged into your live environment) as you will get IP conflicts and cause yourself all sorts of issues!!
I stand to be corrected on all of the above as I have never done this myself but, in theory, I think it should work fine.
Tim
06-14-2012 05:14 AM
Hi Tim
I did like you said, its work fine in lab environement
So, i need to connect my new ASA 5550 to my network and test applications
Thanks a lot
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide