06-14-2012 04:08 PM - edited 03-16-2019 11:40 AM
I have cme in the main site. I need a cheap voice gateway (router) with 4 fxo ports for the branch.. Which model can I use?.
The wan connection is dedicated 1024kbps.
Thanks.
Solved! Go to Solution.
06-15-2012 10:08 AM
The 880 can support 5 CME stations:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps4625/data_sheet_c78-695471.html
880 data sheet:
Though it has only 1 FXO port.
Another option is 1841E
http://www.cisco.com/en/US/prod/collateral/routers/ps5853/ps8321/data_sheet_c78-641296.html
with 4 built-in FXO ports
HTH, please rate all helpful posts!
Chris
06-14-2012 06:04 PM
Any of the 29XX ISR G2 will do just fine. 2901 for example would be a cheap candidate.
Chris
06-15-2012 09:28 AM
The ip phones in the branch must register with cme at the branch. the fxo are for local calls.
the 2900 is an expensive solution.
I would like to know, if a router 800 with a voice gw image will work?.
06-15-2012 10:08 AM
The 880 can support 5 CME stations:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps4625/data_sheet_c78-695471.html
880 data sheet:
Though it has only 1 FXO port.
Another option is 1841E
http://www.cisco.com/en/US/prod/collateral/routers/ps5853/ps8321/data_sheet_c78-641296.html
with 4 built-in FXO ports
HTH, please rate all helpful posts!
Chris
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: