Voice gateway for branch.

Answered Question
Jun 14th, 2012
User Badges:

I have cme in the main site. I need a cheap voice gateway (router) with 4 fxo ports for the branch.. Which model can I use?.

The wan connection is dedicated 1024kbps.

Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Chris Deren Thu, 06/14/2012 - 18:04
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Any of the 29XX ISR G2 will do just fine. 2901 for example would be a cheap candidate.


Chris

Rafael Jimenez Fri, 06/15/2012 - 09:28
User Badges:

The ip phones in the branch must register with cme at the branch. the fxo are for local calls.

the 2900 is an expensive solution.

I would like to know, if a router 800 with a voice gw image will work?.

Correct Answer
Chris Deren Fri, 06/15/2012 - 10:08
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Actions

This Discussion