srw248g4p - boot image needed (boot.bix)

Unanswered Question
Jun 16th, 2012
User Badges:

Hi to all,


I have 48 port Linksys switch srw248g4p. It stopped working after power failure. When i connect via hyperterminal i got this


#####################################################################

Image Loader 1.0.1

<ERR> Diagnostic Loading Fail - Try Runtime

Loading Runtime Image File : SRW224G4P_SRW248G4P_image.bix

Runtime 1.0.2



....................


Please press <Enter> to start Menu session!


#######################################################################


It boots normally to runtime image and i can access main menu, but i still need diagnostic/boot image to work (i still can't access web view and all eth ports are down). Where can i find "SRW224G4P_SRW248G4P_boot.bix" ? Can someone send it to me?

Thank you !

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Davidwagman1 Fri, 06/22/2012 - 12:09
User Badges:
  • Gold, 750 points or more

Hi Emilije,


You can download the firmware from the software download center.


If the link doesn't work, just search for the model #.


Best,

David


Please rate helpful posts.

digitronko Sat, 06/23/2012 - 07:31
User Badges:

Hi David,


Thank you for your reply. Please note that i already have this image and i need boot code/boot image/diagnostic image.

This firmware in your link is something different than boot code. Have in mind that in order to work properly SRW248G4P must have both images loaded. Since Linksys support migrated to Cisco there is no more boot code avalible for download (THANK YOU CISCO), that's why i'm posting this anyway.

Once again, i need file with this filename: SRW224G4P_SRW248G4P_boot.bix which is different image than

SRW224G4P_SRW248G4P_image_VERSION.bix.

best regards,


emilije

Davidwagman1 Sat, 06/23/2012 - 07:42
User Badges:
  • Gold, 750 points or more

Hi Emilije,


Sorry,  I got excited when I saw the firmware in the download center...  Have you tried contacting Small Biz Support?


Best,

David

digitronko Mon, 06/25/2012 - 02:32
User Badges:

well, cisco support engineer told me that boot image does NOT exist, and only thing i need is firmware

available from download center. No comment.

If someone have the same switch and can download image via webview i would appreciate it ( admin - firmware upgrade - option backup - option image / option boot code + you will need some basic tftp)

in the meantime ill try to find same switch at some other customer and download it by myself.

thank you

piotrkuchciak Tue, 11/12/2013 - 23:18
User Badges:

How i can upload SRW224G4P_SRW248G4P_boot.bix to my switch by XMODEM ? As runtime ?

Actions

This Discussion

Related Content