"show environment temperature"

Answered Question
Jun 17th, 2012
User Badges:

The output I'm getting from my 4506 doesn't match the command output documented in the command lookup tool.  I'm seeing:

B31450604#sh env temp

Module Sensor                     Temperature          Status     


1      air inlet                  38C (51C,65C,68C)              ok

1      air outlet                 50C (69C,83C,86C)              ok

2      air inlet                  35C (45C,60C,70C)              ok

2      air outlet                 45C (61C,76C,86C)              ok

3      air inlet                  34C (45C,60C,70C)              ok

3      air outlet                 42C (61C,76C,86C)              ok

4      air inlet                  35C (45C,60C,70C)              ok

4      air outlet                 45C (61C,76C,86C)              ok

5      air inlet                  35C (45C,60C,70C)              ok

5      air outlet                 44C (61C,76C,86C)              ok

6      air inlet                  36C (45C,60C,70C)              ok

6      air outlet                 43C (61C,76C,86C)              ok

What I don't see in the documentation is the meaning of the values within the parentheses.

Would I be wrong to think that it's historical data?

If it is, what's the interval?

Correct Answer by handoko wiyanto about 5 years 4 days ago


check on "Conditions on Supervisor Engine 6-E "

it says ... These linecards support three thresholds: warning, critical, and shutdown.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
soroushm Mon, 06/18/2012 - 20:01
User Badges:
  • Gold, 750 points or more


I believe what you see in parentheses are: (Normal Temp, Over Temp Threshold, Critical Temp Threshold)

plz Rate if it helped.



This Discussion

Related Content