cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
22442
Views
10
Helpful
2
Replies

"show environment temperature"

russemerson
Level 1
Level 1

The output I'm getting from my 4506 doesn't match the command output documented in the command lookup tool.  I'm seeing:

B31450604#sh env temp

Module Sensor                     Temperature          Status     

------+--------------------------+--------------------+------------

1      air inlet                  38C (51C,65C,68C)              ok

1      air outlet                 50C (69C,83C,86C)              ok

2      air inlet                  35C (45C,60C,70C)              ok

2      air outlet                 45C (61C,76C,86C)              ok

3      air inlet                  34C (45C,60C,70C)              ok

3      air outlet                 42C (61C,76C,86C)              ok

4      air inlet                  35C (45C,60C,70C)              ok

4      air outlet                 45C (61C,76C,86C)              ok

5      air inlet                  35C (45C,60C,70C)              ok

5      air outlet                 44C (61C,76C,86C)              ok

6      air inlet                  36C (45C,60C,70C)              ok

6      air outlet                 43C (61C,76C,86C)              ok

What I don't see in the documentation is the meaning of the values within the parentheses.

Would I be wrong to think that it's historical data?

If it is, what's the interval?

1 Accepted Solution

Accepted Solutions

handoko wiyanto
Level 3
Level 3

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/53SG/configuration/pwr_envr.html

check on "Conditions on Supervisor Engine 6-E "

it says ... These linecards support three thresholds: warning, critical, and shutdown.

View solution in original post

2 Replies 2

smehrnia
Level 7
Level 7

Hi,

I believe what you see in parentheses are: (Normal Temp, Over Temp Threshold, Critical Temp Threshold)

plz Rate if it helped.

Soroush.

Hope it Helps!

Soroush.

handoko wiyanto
Level 3
Level 3

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/53SG/configuration/pwr_envr.html

check on "Conditions on Supervisor Engine 6-E "

it says ... These linecards support three thresholds: warning, critical, and shutdown.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: