×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

QoS Configuration for VoIP

Unanswered Question
Jun 20th, 2012
User Badges:

Hello,


i try to configure QoS on a Cisco Small Business SG300 Switch. I followed the instruction on https://supportforums.cisco.com/docs/DOC-13461 and configured one Port for tagging my Traffic from a Aastra IP Phone. Tagging works fine (i verified with wireshark).


The problem is, that all traffic to a PC connected directly to the Aastra IP Phone is blocked. Is there a possibility to tag any other traffic to the port as a default?


Thx for your help!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
sandbankhomes Wed, 07/11/2012 - 11:41
User Badges:

I'm having a similiar problem on the Cisco SF-300 switch. I followed the same document and configured one port for testing. All traffic to/from that port is now blocked. Have you had any luck resolving your issue?

Actions

This Discussion

Related Content