cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2912
Views
0
Helpful
2
Replies

MOH Live Feed - FXO to 3.5mm

shiblyibrahim
Level 3
Level 3

Guys I need help. Ill be really grateful.

I am trying to make MoH Live feed work connecting an FXO port to an iPod or any device.

But for some reason we tried using a device from ebay which is this http://www.ebay.co.uk/itm/3-5MM-AUDIO-PLUG-TO-RJ11-CAT5-CABLE-EXTENDER-DEVICE-50M-/330334917421?pt=UK_Sound_Vision_Other&hash=item4ce97ed32d

Does anyone know how to make it work.

Please rate the post Shibly Ibrahim
1 Accepted Solution

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

Using an analog E&M port as the live-feed MOH interface requires the  minimum number of external components. You connect a line-level audio  feed (standard audio jack) directly to pins 3 and 6 of an E&M RJ-45  connector. The E&M voice interface card (VIC) has a built-in audio  transformer that provides appropriate electrical isolation for the  external audio source. An audio connection on an E&M port does not  require loop-current. The signal immediate and auto-cut-through commands disable E&M signaling on  this voice port. A G.711 audio packet stream is generated by a digital  signal processor (DSP) on the E&M port.

If you use an FXO port as the live-feed MOH interface, connect the MOH  source to the FXO port using a MOD-SC cable if the MOH source has a  different connector than the FXO RJ-11 connector. MOH from a live feed  is supported on the VIC2-2FXO, VIC2-4FXO, EM-HDA-3FXS/4FXO, EM-HDA-6FXO,  and EM2-HDA-4FXO.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemoh.html#wp1010511

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

2 Replies 2

Jaime Valencia
Cisco Employee
Cisco Employee

Using an analog E&M port as the live-feed MOH interface requires the  minimum number of external components. You connect a line-level audio  feed (standard audio jack) directly to pins 3 and 6 of an E&M RJ-45  connector. The E&M voice interface card (VIC) has a built-in audio  transformer that provides appropriate electrical isolation for the  external audio source. An audio connection on an E&M port does not  require loop-current. The signal immediate and auto-cut-through commands disable E&M signaling on  this voice port. A G.711 audio packet stream is generated by a digital  signal processor (DSP) on the E&M port.

If you use an FXO port as the live-feed MOH interface, connect the MOH  source to the FXO port using a MOD-SC cable if the MOH source has a  different connector than the FXO RJ-11 connector. MOH from a live feed  is supported on the VIC2-2FXO, VIC2-4FXO, EM-HDA-3FXS/4FXO, EM-HDA-6FXO,  and EM2-HDA-4FXO.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemoh.html#wp1010511

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Thanks Java.

Please rate the post Shibly Ibrahim
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: