×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CUCM 4.3.2 and SRTP

Unanswered Question
Jun 26th, 2012
User Badges:

Hi there

please i need an help and information about my case , i really didn't know where to post this problem .

I'm a CCVP certified , here at my work they asked me to implement security in a Call Manager 4.3.2 enviroment.

Do u know if Cisco still supports it in case i need help and where can i buy the Cisco token usb key needed to create the CTL file ? or u know please who can i contact for these kind of informations?

Thank u guys


greetings from Italy



Antonio Scilimati

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (3 ratings)
Loading.
Jaime Valencia Tue, 06/26/2012 - 07:41
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

AFAIK the tokens are the same so you shoud stil be able to buy them.

4.3 is still supported

End-of-Sale and End-of-Life Announcement for the  Cisco Unified Communications Manager Version 4.3


http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/vcallcon/ps556/end_of_life_notice_c51-612453.html


HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

Rob Huffman Tue, 06/26/2012 - 07:42
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Antonio,


CUCM 4.3 is still supported (see below);


Table 1. End-of-Life Milestones and Dates for the Cisco Unified Communications Manager Version 4.3



Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

July 27, 2010

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

January 25, 2011

Last Ship Date:App. SW

The  last-possible ship date that can be requested of Cisco and/or its  contract manufacturers. Actual ship date is dependent on lead time.

April 25, 2011

End of SW Maintenance Releases Date:App. SW

The  last date that Cisco Engineering may release any final software  maintenance releases or bug fixes. After this date, Cisco Engineering  will no longer develop, repair, maintain, or test the product software.

January 25, 2012

End of New Service Attachment Date:App. SW

For  equipment and software that is not covered by a service-and-support  contract, this is the last date to order a new service-and-support  contract or add the equipment and/or software to an existing  service-and-support contract.

January 25, 2012

End of Service Contract Renewal Date:App. SW

The last date to extend or renew a service contract for the product.

April 22, 2013

Last Date of Support:App. SW

The  last date to receive service and support for the product. After this  date, all support services for the product are unavailable, and the  product becomes obsolete.

January 31, 2014



http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps556/end_of_life_notice_c51-612453.html



Here is the Security guide for CCM 4.2, i don't believe there is a separate one for 4.3;


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/4_2_3/sec423.html



You should still be able to purchase the tokens ...check out this part#;


KEY-CCM-ADMIN-K9=



Cheers!

Rob



"Show a little faith, there's magic in the night" - Springsteen

Antonio Scilimati Tue, 06/26/2012 - 12:31
User Badges:

Hi Rob

thank u so much for the answer , i'm sure to solve my case here at my work


Bye bye


Antonio

Antonio Scilimati Tue, 06/26/2012 - 12:52
User Badges:

Hi again guys,

regarding configuring security in a CUCM 4 scenario, it is almost clear but do you know how many cisco usb token do i need for configure a CTL file? becouse this aspect is not so clear


see u guys


Antonio

Rob Huffman Tue, 06/26/2012 - 13:22
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Antonio,


You will need a minimum of 2 etokens


Caution You need a minimum of two security tokens the first time that you configure the

client. Do not insert the tokens until the application prompts you to do so. If you

have two USB ports on the workstation or server, do not insert two security tokens

at the same time.


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/4_2_3/secuauth.pdf




I think this thread is a "must" read


http://www.gossamer-threads.com/lists/cisco/voip/146498




Cheers!

Rob



"Show a little faith, there's magic in the night" - Springsteen

Antonio Scilimati Tue, 06/26/2012 - 23:02
User Badges:

Great Rob

you are very gentle , l'll pay attention to what your wrote and to the links you posted.

Very interesting , thanks again


Antonio

Rob Huffman Wed, 06/27/2012 - 06:21
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Antonio,


You are most welcome my friend


Cheers!

Rob



"Show a little faith, there's magic in the night" - Springsteen

Actions

This Discussion

Related Content