TMS using the E20 H.323 protocol

Answered Question
Jun 26th, 2012
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 TelePresence

When will TMS be able to make use of the E20's added H.323 protocol?  As of right now, TMS currenly only sees the E20 as SIP only, and not the combined H.323/SIP endpoint that it is right now.


Thanks, Patrick.

Correct Answer by Kjetil Ree about 4 years 10 months ago

Cisco TMS 13.2.1 was actually released today, and is now available on cisco.com.


-Kjetil

Correct Answer by Rafal Szeremeta about 4 years 11 months ago

Hello Patrick


There has been plans for that for a while now and E20 H323 support should be introduced in next minor release of TMS.


This release will be out in few months.


Best Regards


Rafal

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Oleksandr Yurchenko Tue, 06/26/2012 - 23:53
User Badges:
  • Silver, 250 points or more

Hi Patrick

E20 can use H323 for TE4 software.Which version of the E20 are you using?


What is the call server are you using? CUCM or VCS ?

CUCM with E20 not use h323


Br.Oleksandr

Correct Answer
Rafal Szeremeta Wed, 06/27/2012 - 00:50
User Badges:
  • Cisco Employee,

Hello Patrick


There has been plans for that for a while now and E20 H323 support should be introduced in next minor release of TMS.


This release will be out in few months.


Best Regards


Rafal

Tomonori Taniguchi Wed, 07/04/2012 - 04:41
User Badges:
  • Cisco Employee,

H323 call on E20 Endpoint has now added on TMS13.2.1 release as new enhancement.

TMS13.2.1 will be available from Cisco portal site in next few days.

Correct Answer
Kjetil Ree Wed, 07/04/2012 - 06:49
User Badges:
  • Cisco Employee,

Cisco TMS 13.2.1 was actually released today, and is now available on cisco.com.


-Kjetil

Patrick Sparkman Wed, 07/04/2012 - 18:45
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 TelePresence

Thank you Kjetil and Tomonori for the update!  My forum discussion was almost prefect timing or something, I don't know what, but excelent.  I installed it today, so I can start testing it later this week and next.  I know the E20s have been a SIP online endpoint since it's first release, but just as a general opinion which protocol would you guys recommend running with the E20s?  I can do either H.323 or SIP on any of our endpoints as our VCS will search both types of addresses through it's transforms and search rules.

Tomonori Taniguchi Wed, 07/04/2012 - 18:50
User Badges:
  • Cisco Employee,

I’d recommend keeping SIP as default call protocol on E20 as many new enhancement features on VCS require using SIP (TLS) including new enhancement implemented in upcoming X7.2 software release.

However it also true some of deployment scenario may works more friendly by using H.323 protocol (i.e. firewall related).

Actions

This Discussion

Related Content