cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2247
Views
0
Helpful
9
Replies

WS-X4612-SFP-E on a non 4503 chassis

alig.norbert
Level 4
Level 4

Hi all,

Guess I know the answer ;-(

Can a WS-X4612-SFP-E be put in a non 4503 chassis?

- The "show modules" shows "unsupported module"

- Chassis Type :   WS-C4503

- Sup card:            WS-X4013+TS

- IOS:                    Version 12.2(25)EWA8

How about a new chassis, 4503-E? Does the WS-X4013+TS still supports PBR?

Thanks,

Norbert

2 Accepted Solutions

Accepted Solutions

Ivan Shirshin
Cisco Employee
Cisco Employee

Hi Norbert,

This card is only supported on E-series chassis (including 4503-E) with sup6 or sup7. See table 1:

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html

Cisco Catalyst 4500 46xx E-Series Line Cards

24 Gbps

Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4507R+E, 4510R-E, and 4510R+E2

Supervisor Engine 7-E,

Supervisor Engine 7L-E,

Supervisor Engine 6-E,

Supervisor Engine 6L-E

Kind Regards,
Ivan

**Please grade this post if you find it useful.

Kind Regards,
Ivan

View solution in original post

Hi Leo,

This supervisor actually supports 4503-E:

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps6013/product_data_sheet0900aecd8017a0c5.html

"Exclusive to the Cisco® Catalyst® 4503-E and 4503 Switches chassis, the Cisco Catalyst 4500 Series Supervisor Engine II-Plus-TS"

Kind Regards,
Ivan

Kind Regards,
Ivan

View solution in original post

9 Replies 9

Ivan Shirshin
Cisco Employee
Cisco Employee

Hi Norbert,

This card is only supported on E-series chassis (including 4503-E) with sup6 or sup7. See table 1:

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html

Cisco Catalyst 4500 46xx E-Series Line Cards

24 Gbps

Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4507R+E, 4510R-E, and 4510R+E2

Supervisor Engine 7-E,

Supervisor Engine 7L-E,

Supervisor Engine 6-E,

Supervisor Engine 6L-E

Kind Regards,
Ivan

**Please grade this post if you find it useful.

Kind Regards,
Ivan

So, no way to re-use WS-X4013+TS on th 4503-E chassis, right?

Regards,

Norbert

Hi Norbert,

You can use WS-X4013+TS supervisor on 4503-E chassis and it will work (as they are compatible) but it won't support WS-X4612-SFP-E card.

Kind Regards,
Ivan

**Please grade this post if you find it useful.

Kind Regards,
Ivan

So, no way to re-use WS-X4013+TS on th 4503-E chassis, right?

Nope.  You can use the supervisor card on older non-E chassis.

Hi Leo,

This supervisor actually supports 4503-E:

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps6013/product_data_sheet0900aecd8017a0c5.html

"Exclusive to the Cisco® Catalyst® 4503-E and 4503 Switches chassis, the Cisco Catalyst 4500 Series Supervisor Engine II-Plus-TS"

Kind Regards,
Ivan

Kind Regards,
Ivan

So, WS-X4013+TS is supported on 4503-E chassis, but the line card is not supported

with 4013+TS on that chassis.

Thank you,

Norbert

Sent from Cisco Technical Support iPhone App

That's correct, Norbert. Welcome!

Kind Regards,
Ivan

Kind Regards,
Ivan

Thanks Ivan! 

welcome :-)

Kind Regards,
Ivan
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco