WS-X4612-SFP-E on a non 4503 chassis

Answered Question
Jun 27th, 2012
User Badges:

Hi all,

Guess I know the answer ;-(


Can a WS-X4612-SFP-E be put in a non 4503 chassis?

- The "show modules" shows "unsupported module"

- Chassis Type :   WS-C4503

- Sup card:            WS-X4013+TS

- IOS:                    Version 12.2(25)EWA8


How about a new chassis, 4503-E? Does the WS-X4013+TS still supports PBR?


Thanks,

Norbert

Correct Answer by Ivan Shirshin about 4 years 11 months ago

Hi Leo,


This supervisor actually supports 4503-E:

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps6013/product_data_sheet0900aecd8017a0c5.html


"Exclusive to the Cisco® Catalyst® 4503-E and 4503 Switches chassis, the Cisco Catalyst 4500 Series Supervisor Engine II-Plus-TS"


Kind Regards,
Ivan

Correct Answer by Ivan Shirshin about 4 years 11 months ago

Hi Norbert,


This card is only supported on E-series chassis (including 4503-E) with sup6 or sup7. See table 1:

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html


Cisco Catalyst 4500 46xx E-Series Line Cards

24 Gbps

Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4507R+E, 4510R-E, and 4510R+E2

Supervisor Engine 7-E,

Supervisor Engine 7L-E,

Supervisor Engine 6-E,

Supervisor Engine 6L-E




Kind Regards,
Ivan

**Please grade this post if you find it useful.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Ivan Shirshin Wed, 06/27/2012 - 00:14
User Badges:
  • Cisco Employee,

Hi Norbert,


This card is only supported on E-series chassis (including 4503-E) with sup6 or sup7. See table 1:

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html


Cisco Catalyst 4500 46xx E-Series Line Cards

24 Gbps

Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4507R+E, 4510R-E, and 4510R+E2

Supervisor Engine 7-E,

Supervisor Engine 7L-E,

Supervisor Engine 6-E,

Supervisor Engine 6L-E




Kind Regards,
Ivan

**Please grade this post if you find it useful.

alig.norbert Wed, 06/27/2012 - 00:21
User Badges:

So, no way to re-use WS-X4013+TS on th 4503-E chassis, right?


Regards,

Norbert

Ivan Shirshin Wed, 06/27/2012 - 02:01
User Badges:
  • Cisco Employee,

Hi Norbert,


You can use WS-X4013+TS supervisor on 4503-E chassis and it will work (as they are compatible) but it won't support WS-X4612-SFP-E card.


Kind Regards,
Ivan

**Please grade this post if you find it useful.

Leo Laohoo Wed, 06/27/2012 - 02:01
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

So, no way to re-use WS-X4013+TS on th 4503-E chassis, right?

Nope.  You can use the supervisor card on older non-E chassis.

alig.norbert Wed, 06/27/2012 - 03:05
User Badges:


So, WS-X4013+TS is supported on 4503-E chassis, but the line card is not supported

with 4013+TS on that chassis.


Thank you,

Norbert


Sent from Cisco Technical Support iPhone App

Ivan Shirshin Wed, 06/27/2012 - 03:55
User Badges:
  • Cisco Employee,

That's correct, Norbert. Welcome!


Kind Regards,
Ivan

Leo Laohoo Wed, 06/27/2012 - 04:04
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Thanks Ivan! 

Actions

This Discussion

Related Content