×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Mark Okern Wed, 06/27/2012 - 11:06
User Badges:

I can tell you how ours works...


Our environment has EX series, C series, and Jabber TelePresence (aka Movi) registering to our VCS Control. We have a SIP trunk between the VCS-C and our CUCM. On the VCS, we have FindMe enabled.


Any calls placed to my video SIP URI are configured via FindMe to also forward to my CUCM extension. I can answer the call on my Cius (or 9971, Jabber for Windows, etc.) and get video both directions.


You can make a route pattern to direct calls to VCS devices from CUCM devices.


I've seen problems with CUCM versions under 8.x where you'll only get audio when calling from CUCM to VCS.


-Mark

Michael Boscia Wed, 06/27/2012 - 11:51
User Badges:

So I already have the SIP trunk between VCS-C and CUCM, but the problem I am having is that I only get audio calling from my EX90 or E20 or Jabber to the Cius.


VCS X7.1

CUCM 8.6.2


The guy with the Cius is telling me all of his video options are enabled.

Very strange.

Actions

This Discussion

Related Content