Activate certain SSID on certain AP in WLC

Answered Question
Jun 28th, 2012
User Badges:

in current environment i have 3SSID , SSID_1, SSID_2 and SSID_3


most AP requires all 3 of them


certain AP in certain location such as in the lobby, i just need SSID_1


is this possible? any hint on this?

Correct Answer by Scott Fella about 5 years 1 month ago

Yes you can. It's called AP Groups. You define a group to broadcast certain SSIDs. Then you can assign APs to that group.


Sent from Cisco Technical Support iPhone App

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Scott Fella Thu, 06/28/2012 - 10:47
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Yes you can. It's called AP Groups. You define a group to broadcast certain SSIDs. Then you can assign APs to that group.


Sent from Cisco Technical Support iPhone App

kinwai Thu, 06/28/2012 - 10:49
User Badges:

Thanks scott ! This will do the trick !

Scott Fella Thu, 06/28/2012 - 10:50
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

No problem and thanks for using the rating system!


Sent from Cisco Technical Support iPhone App

Scott Fella Thu, 06/28/2012 - 10:49
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Here is a good link


https://supportforums.cisco.com/docs/DOC-19033


Sent from Cisco Technical Support iPhone App

Actions

This Discussion

Related Content