×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

second ssid in controller

Answered Question
Jul 3rd, 2012
User Badges:

Hi,


We have one ssid currently in our wireless controller. Second one needs to be added.

the setup has an ap group created also. How do i make sure that the second ssid gets broadcasted & is functional after it is created.

It will have an internal dhcp server on the controller itself.


Also will all the ap's in the network propogate this new ssid. Thanks in advance

Correct Answer by Amjad Abdullah about 5 years 1 month ago

Hi,


Your new SSID will be part of the default-group when it is created. If you have APs under that group then the SSID will appear on those groups.

If you don't have any AP under this group (default-group) then you need to add the new SSID to be broadcasted on the groups that you want.

From WLAN->Advanced-> AP Groups you choose the groups and configure them to broadcast the new SSID.


HTH


Amjad

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Amjad Abdullah Tue, 07/03/2012 - 22:41
User Badges:
  • Red, 2250 points or more

Hi,


Your new SSID will be part of the default-group when it is created. If you have APs under that group then the SSID will appear on those groups.

If you don't have any AP under this group (default-group) then you need to add the new SSID to be broadcasted on the groups that you want.

From WLAN->Advanced-> AP Groups you choose the groups and configure them to broadcast the new SSID.


HTH


Amjad

Actions

This Discussion