Unanswered Question
Jul 4th, 2012
User Badges:


I've configured profile and defined only g729r8 codec

But i can see that g729ab is using.

How to get rid of g729 codec with vad?

dspfarm profile 22 transcode 

codec g711alaw

codec g711ulaw

codec g729r8

maximum sessions 6

associate application SCCP

Transcoding Oper State: ACTIVE - Cause Code: NONE

Active Call Manager:, Port Number: 2000

TCP Link Status: CONNECTED, Profile Identifier: 22

Reported Max Streams: 12, Reported Max OOS Streams: 0

Supported Codec: g711alaw, Maximum Packetization Period: 30

Supported Codec: g711ulaw, Maximum Packetization Period: 30

Supported Codec: g729r8, Maximum Packetization Period: 60

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30

Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30

Klngrd-GT-VGW-c2911#sh sccp con

sess_id    conn_id      stype mode     codec   sport rport ripaddr conn_id_tx

86083968   103096539    xcode sendrecv g711u   23650 30318          

86083968   103096538    xcode sendrecv g729ab  29280 25202          

Total number of active session(s) 1, and connection(s) 2

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Ayodeji Okanlawon Wed, 07/04/2012 - 07:26
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

what is your scenario. Please describe the call flow for us. What elements are involved? gateway, cucm, sip trunk etc?

Please rate all useful posts

"There is a wideness in God's mercy Like the wideness of the sea.There's a kindness in His justice Which is more than liberty"


This Discussion