We have a Cisco MDS 9509 5.0.4(d) connected to these are brocade HP C class switches most have been set to Access Gateway mode but we have two that are in interop mode.
When we attempt to activate any chnages to the active zoneset with get the following error message and the changes are not applied. We know what domain id it refers too and it is one of the brocades in interop mode this is running FOS 5.3.0.
%SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id 0x401E0000).
%ZONE-2-ZS_CHANGE_SFC_FAILED: %$VSAN 2%$ SFC failed : domain 0x67 returns UNSUPPORTED_COMMAND
%ZONE-2-ZS_CHANGE_ACTIVATION_FAILED: %$VSAN 2%$ Activation failed
%ZONE-2-ZS_CHANGE_ACTIVATION_FAILED_RESN_DOM: %$VSAN 2%$ Activation failed : reason Revision level not supported
%SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id 0x401E0000).
%ZONE-2-ZS_CHANGE_SFC_FAILED: %$VSAN 2%$ SFC failed : domain 0x67 returns UNSUPPORTED_COMMAND
%ZONE-2-ZS_CHANGE_ACTIVATION_FAILED: %$VSAN 2%$ Activation failed
%ZONE-2-ZS_CHANGE_ACTIVATION_FAILED_RESN_DOM: %$VSAN 2%$ Activation failed : reason Revision level not supported